Explanation: Ensure that no two network devices are assigned the same IP address. If two network devices have the same IP address, you will encounter a duplicate IP address conflict, which will render one of your devices unusable.

QUESTION 23 What is the proper schedule that should be used in the maintenance of Network Topology Diagrams and Network Configuration Tables?

A. At the end of the year.

B. Before making any changes.

C. At the end of the day.

D. At the time changes are applied.

E. At the end of the month.

Answer: D

Explanation: This is correct per: http://www.cisco.com/en/US/products/hw/univgate/ps509/products_configuration_example09186a0080094148. shtml Note: Ensure logging is not turned on for the line from which you are collecting output (use the show logging command). This states that you are getting info from a particular line and as a result this would allow you to find out if you had duplicate ip addresses.

QUESTION 24 Switch>show version Cisco Internet work Operating System Software IOS(tm)C2950 Software(C2950-I6Q4L2-M), Version 12.1(11)EA1, RELEASE SOFTWARE(fc1) Copyright(c) 1986-2002 by cisco Systems, Inc. Compiled Web 28-Aug-02 10:25 by antonino Image text-base: 0x80010000, data-base: 0x80528000 ROM: Bootstrap program is CALHOUN boot loader Switch uptime is 8 hours, 34 minutes System returned to ROM by power-on System image file is "flash:/c2950-i6q412-mz.121-11-EA1.bin" cisco WS-C2950-24 (RC32300) processor (revision G0) with 20402K bytes of memory. Processor board ID FHK0645Z0TE Last reset from system-reset Running Standard Image 24 FastEthernet/IEEE 802.3 interface(s) 32K byes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:0B:5F:4D:77:80 Motherboard assembly number: 73-5781-11 Power supply part number: 34-0965-01 Motherboard serial number: F0C064507AL Power supply serial number: PHI0638059E Model revision number: G0 Motherboard revision number: A0 Model number: WS-C2950-24 System serial number: FHK0645Z0TE Configuration register is 0xF Switch> Study the output of the show version command illustrated above. Which items of information can be determined regarding the network configuration of this particular switch? (Choose all that apply.)

A. Routing protocol version

B. Model of the device

C. MAC addresses of any interfaces or ports

D. Spanning-tree version

E. Installed memory

F. Active routing protocol

Answer: B, E

QUESTION 25 Exhibit: You are a technician at Cisco Highway installing new computers at Cisco Highway 's remote site in Mexico City. However, you cannot make the connection between the computers and the corporate web server, Cisco Highway A. By utilising the ping command from the router at the Mexico City site, you can establish successful communication between both the intranet web server and the newly installed PCs. (Choose all that apply.)

A. Incorrect routing protocol configuration on the remote site router.

B. Incorrect routing protocol configuration on the router connected to the subnet where the intranet web server is installed.

C. Incorrect default gateway configured on the new PCs.

D. Incorrect default gateway configured on the intranet web server.

Answer: A, C

QUESTION 26 You are a technician at Cisco Highway .com. Your newly appointed Cisco Highway trainee wants to know which components are essential in an End-system Topology Diagram. What would your reply be? (Choose all that apply.)

A. Device illustration

B. Operating system

C. IP routing protocol

D. Connection to the network

E. Device name

F. VTP domain

Answer: A, D, E

Explanation: Not B: Operating system is not included in the topology diagram.

QUESTION 27 You are a technician at Cisco Highway .com. Your newly appointed Cisco Highway trainee wants to know which Microsoft Windows command is utilized to verify the validity of a declared address for an end-system. What would your reply be?

A. ping

B. show ip interface

C. tracert

D. arp -a

E. telnet

Answer: D

QUESTION 28 The show ppp multilink command provides the following information:

A. Bundle name

B. Bundle flapping record

C. Bundle idle time out

D. Bundle disconnect reason

Answer: A

QUESTION 29 You are a technician at Cisco Highway .com. Your newly appointed Cisco Highway trainee wants to know wants to display active TCP/IP connections on a Microsoft Windows end system. Which command would she use?

A. ifconfig -a

B. traceroute

C. netstat

D. ping

Answer: C

QUESTION 30 You are a trainee at Cisco Highway . The Cisco Highway administrator asks you to make a record of network applications that are available on an end-system. Which two high bandwidth applications do you need to take into account because of its large impact on network performance? (Choose all that apply.)

A. IPTV multicast applications

B. Calendar software clients

C. Email clients

D. Streaming video players

E. Internet browsers

Answer: A, D

Top of page	03 of 34

Search and Find Anything Here

Web	www.ciscohighway.com